An aqueous blend of acrylic copolymers, coalescent solvents, plasticisers, levelling agents,
polyethylene wax, defoamer, and preservative. Specially formulated to protect and enhance the
appearance of vinyl, thermoplastic, linoleum, and rubber floors, sealed porous floors, terrazzo,
marble, stone, and quarry tiles.
Features include:
Gives a high gloss “wet look” finish.
Excellent wear resistance.
Easily maintained.
May be stripped easily using the Kitchenmaster Floor Stripper.
Resistant to slip, scuffing, soiling and detergents.
High solids content (25%) means fewer applications to achieve a superb result (leading to
reduced labour time).
Excellent surface adhesion, no seal or undercoat required.
Surfactants used are biodegradable and phosphate-free.
PROPERTIES: SPECIFICATION:
Appearance @ 20oC White liquid
Odour Slightly sweet
pH (neat) 8.5 +/- 0.5
Specific Gravity @ 20oC 1.030 +/- 0.002
Flammability Non-flammable
DIRECTIONS FOR USE:
Clean floor and remove all traces of old polish.
Using a lint free mop, first apply a thin and even coat in one direction across the entire floor.
Allow first coat to dry thoroughly, at least 40 minutes.
Apply the second coat at a 90° angle to the first. Do not apply within 15cm of walls, benches or
edge of the previous coat to prevent unsightly buildup where there is little wear.
Apply a third coat if you require a higher gloss, less maintenance or using ultra high speed
machines.
Beware of producing foam as this will prevent even film being laid.
